Preview
Hüseyin Akbulut, MSc (2026). Back-Saver Sit-and-Reach Test: Protocol and Application. Sporeus. Retrieved, November 19, 2026. https://sporeus.com/en/egzersiz-testleri-en/back-saver-sit-and-reach-test/
Measures: Single-leg hamstring flexibility (cm), with less load on the lumbar spine
Table of Contents
Difficulty: Easy | Category: Flexibility
Protocol
The Back-Saver Sit-and-Reach Test is a single-leg flexibility protocol developed by the FITNESSGRAM program to reduce lumbar spine stress that can result from the bilateral pressure of the standard test. The test is administered separately for each leg. The participant sits in front of the sit-and-reach box; one leg is fully extended with the foot sole contacting the box plate, while the other knee is bent with the sole of that foot flat on the floor 5–8 cm to the side of the straight knee. This way one side’s hamstrings are assessed at a time. The participant reaches forward slowly four times and holds the fourth reach for at least 1 second; this value is recorded (FITNESSGRAM). The other leg is then tested. Right and left results are compared. In FITNESSGRAM the score is recorded up to a maximum of 12 inches (30.5 cm); the Healthy Fitness Zone threshold is 8 inches (about 20 cm) for boys and 9–12 inches for girls depending on age. The test is particularly appropriate for children and adolescents; evaluation can be made according to FITNESSGRAM Healthy Fitness Zone criteria. The test is useful for tracking right and left hamstring flexibility separately; research on the link between hamstring flexibility and low back pain is inconsistent. Participants should complete a brief warm-up walk before testing; vigorous stretching exercises should be avoided.
Formula
Bilateral asymmetry = |right score − left score|
Equipment Required
sit-and-reach box, mat
Interpretation
There is no single widely accepted normative table for this test. Results are best interpreted against the person’s previous measurements with the same protocol and equipment (and, where relevant, left-right comparison).
Practical Applications
Shows right and left hamstring flexibility separately; used as an alternative to the standard test in individuals with lower back pain.
Limitations
Positioning the free leg can complicate standardization; adult normative data is limited.
Related Tests: Sit-and-Reach Test, Modified Sit-and-Reach Test, Straight Leg Raise Test (SLR)
Sources: Meredith MD & Welk GJ, 2010, FITNESSGRAM/ACTIVITYGRAM Test Administration Manual; Hui SC & Yuen PY, 2000, Medicine & Science in Sports & Exercise
Hüseyin Akbulut is the founder of Sporeus and author of THRESHOLD (EŞİK), a 540-page Turkish-language book on endurance science.
- 540pp THRESHOLD Book
- MSc Sport Sciences
- Marmara University
Protocol The Back-Saver Sit-and-Reach Test is a single-leg flexibility protocol developed by the FITNESSGRAM program to reduce lumbar spine stress that can result from the bilateral pressure of the standard test. The test is administered separately for each leg. The participant sits in front of the sit-and-reach box; one leg is fully extended with the foot sole contacting the box plate, while the other knee is bent with the sole of that foot flat on the floor 5–8 cm to the side of the straight knee. This way one side's hamstrings are assessed at a time. The participant reaches forward slowly four times and holds the fourth reach for at least 1 second; this value is recorded (FITNESSGRAM). The other leg is then tested. Right and left results are compared. In FITNESSGRAM the score is recorded up to a maximum of 12 inches (30.5 cm); the Healthy Fitness Zone threshold is 8 inches (about 20 cm) for boys and 9–12 inches for girls depending on age. The test is particularly appropriate for children and adolescents; evaluation can be made according to FITNESSGRAM Healthy Fitness Zone criteria. The test is useful for tracking right and left hamstring flexibility separately; research on the link between hamstring flexibility and low back pain is inconsistent. Participants should complete a brief warm-up walk before testing; vigorous stretching exercises should be avoided. Formula
Bilateral asymmetry = |right score − left score|
Interpretation
There is no single widely accepted normative table for this test. Results are best interpreted against the person's previous measurements with the same protocol and equipment (and, where relevant, left-right comparison).