Skip to main content Skip to content
Exercise Tests

Sit-and-Reach Test: Protocol, Norms and Application

Sit-and-Reach Test: Protocol, Norms and Application

Preview

Hüseyin Akbulut, MSc (2026). Sit-and-Reach Test: Protocol, Norms and Application. Sporeus. Retrieved, November 17, 2026. https://sporeus.com/en/egzersiz-testleri-en/sit-and-reach-test/

Measures: Hamstring and lower-back flexibility (cm)

Table of Contents
  1. Protocol
  2. Formula
  3. Equipment Required
  4. Normative Values (Age: 20-29 (CSEP; also in the ACSM guidelines))
  5. Practical Applications
  6. Limitations

Difficulty: Easy  |  Category: Flexibility

Protocol

The Sit-and-Reach Test is a standard field assessment of static flexibility in the hamstring muscle group and lower back region. Prior to testing, participants should complete 5-10 minutes of light aerobic warm-up followed by gentle stretching of the hamstring region. The participant sits on a flat surface with legs fully extended and knees locked. Foot soles must maintain full contact with the sit-and-reach box plate (or a marked wall). The participant slowly leans forward, pushing fingertips together as far as possible without bouncing, maintaining normal breathing. Knee flexion is not permitted; the administrator may lightly press on the knees to verify extension. At maximum reach, the position is held for 1-2 seconds. The measurement is recorded at the farthest point reached by the fingertips. In the CSEP protocol two trials are performed and the best score is recorded. In the Canadian protocol (CSEP, also used in the ACSM guidelines) the value is read from the box scale; the soles of the feet are at the 26 cm mark, so values above 26 cm mean reaching beyond the feet. Test reliability is high (r = 0.89-0.98). Anthropometric variables such as thigh length, arm length and sitting height may influence results, which is why modified versions are preferred in some settings. Results are compared against age- and sex-specific normative tables. The test is widely used in health-related fitness assessments and athlete screening.

Formula

Score (cm) = value reached by the fingertips on the box scale (on the CSEP box the soles of the feet are at the 26 cm mark)

Equipment Required

sit-and-reach box or measuring ruler, tape

Normative Values (Age: 20-29 (CSEP; also in the ACSM guidelines))

Classification Male Female
Excellent ≥40 cm ≥41 cm
Good 34-39 cm 37-40 cm
Average 30-33 cm 33-36 cm
Below Average 25-29 cm 28-32 cm
Poor ≤24 cm ≤27 cm

Practical Applications

A widely used field test for determining flexibility levels and preparing exercise prescriptions.

Limitations

Upper limb length and sitting height affect results; contraindicated in disc herniation or acute sciatica.

Related Tests: Modified Sit-and-Reach Test, Back-Saver Sit-and-Reach Test, Active Knee Extension Test

Sources: Wells KF & Dillon EK, 1952, Research Quarterly; ACSM Guidelines for Exercise Testing, 2022; Hoeger WK & Hopkins DR, 1992, Research Quarterly

Was this helpful?
Hüseyin Akbulut
Written by Hüseyin Akbulut, MSc Coach

Hüseyin Akbulut is the founder of Sporeus and author of THRESHOLD (EŞİK), a 540-page Turkish-language book on endurance science.

  • 540pp THRESHOLD Book
  • MSc Sport Sciences
  • Marmara University
Full profile
Key Facts
Protocol The Sit-and-Reach Test is a standard field assessment of static flexibility in the hamstring muscle group and lower back region. Prior to testing, participants should complete 5-10 minutes of light aerobic warm-up followed by gentle stretching of the hamstring region. The participant sits on a flat surface with legs fully extended and knees locked. Foot soles must maintain full contact with the sit-and-reach box plate (or a marked wall). The participant slowly leans forward, pushing fingertips together as far as possible without bouncing, maintaining normal breathing. Knee flexion is not permitted; the administrator may lightly press on the knees to verify extension. At maximum reach, the position is held for 1-2 seconds. The measurement is recorded at the farthest point reached by the fingertips. In the CSEP protocol two trials are performed and the best score is recorded. In the Canadian protocol (CSEP, also used in the ACSM guidelines) the value is read from the box scale; the soles of the feet are at the 26 cm mark, so values above 26 cm mean reaching beyond the feet. Test reliability is high (r = 0.89-0.98). Anthropometric variables such as thigh length, arm length and sitting height may influence results, which is why modified versions are preferred in some settings. Results are compared against age- and sex-specific normative tables. The test is widely used in health-related fitness assessments and athlete screening. Formula

Score (cm) = value reached by the fingertips on the box scale (on the CSEP box the soles of the feet are at the 26 cm mark)

Equipment Required

sit-and-reach box or measuring ruler, tape