Skip to main content Skip to content
Sport

The Endurance Map: How to Set Training Boundaries for HIIT

The Endurance Map: How to Set Training Boundaries for HIIT

Preview

Hüseyin Akbulut, MSc (2026). The Endurance Map: How to Set Training Boundaries for HIIT. Sporeus. Retrieved, November 19, 2026. https://sporeus.com/en/sport/endurance-map-training-boundaries-hiit/

This article sets out what you need to know to structure HIIT sessions. It is based on the online book on high-intensity interval training and agile periodisation published by Mladen Jovanović in 2018, and gives a short summary of the model presented there: how physiological boundaries can be estimated and how they can be used for HIIT. The many parameters in the model also indicate which type of session can be performed for how long and at what intensity. Let us look at what the endurance map is, so that we can use it as a reference when writing programmes.

Table of Contents
  1. Definitions of the Anaerobic Threshold
  2. Endurance Boundaries and Training Intensity Zones
  3. References

In his 2018 book, Jovanović explains intervals through a concept he calls the endurance map, which marks the physiological breakpoints of performance.

Jovanović notes that the endurance map table may be wrong on several physiological details, but that overall it sits close to the real breakpoints. We can therefore study the map and use it to set work and rest intervals in training.

To understand the endurance map, imagine an athlete on level ground whose exercise intensity starts at maximum and then decreases step by step, depending on available energy.

The intensity runs from maximal sprinting speed (MSS) all the way down to standing still. Another assumption is that, on average, athletes switch from walking to running at around 7 km/h.

The two parameters on the map that can be used as a HIIT guide are the athlete’s maximal sprinting speed and maximal aerobic speed (MAS). MAS is the speed reached at maximal oxygen uptake in a graded exercise test. The difference between maximal sprinting speed and maximal aerobic speed is defined as the anaerobic speed reserve (Jovanović, 2018).

Definitions of the Anaerobic Threshold

Defining the anaerobic threshold is complicated. In research, it has been identified using:

  • the maximal lactate steady state in constant-pace running,
  • blood lactate rising above 4 mmol/L,
  • the respiratory threshold based on oxygen and carbon dioxide levels.

Knowing these boundaries is essential for developing performance.

In the endurance map, as in the studies it draws on, the anaerobic threshold is also described as the point where the recruitment shifts from slow-twitch towards fast-twitch muscle fibres.

In the model, athletes working in this range have to stop within roughly 20 to 40 minutes. The aerobic threshold can be defined as the first ventilatory threshold in a graded exercise test, corresponding to a blood lactate of around 2 mmol/L (Jovanović, 2018).

Heart rate can be used safely for exercise below maximal aerobic speed. Above MAS, however, and when designing athlete-specific sessions such as HIIT, it can lead to incomplete or wrong calculations.

The endurance map table was built for an athlete with a maximal heart rate of 200 and a resting heart rate of 50. For some programmes, the maximal speed reached in a graded test or maximal oxygen uptake (VO₂max) can be used instead of heart rate.

Endurance Boundaries and Training Intensity Zones

Building on the work of Seiler and Tønnessen (2009) and of Solli and colleagues (2017), three intensity ranges based on the aerobic and anaerobic thresholds are used:

  • High-intensity training
  • Moderate-intensity training
  • Low-intensity training

In this framework, any session whose work bouts lie above the lactate threshold, at roughly 80% of maximal aerobic speed or higher, counts as HIIT, that is, high-intensity interval training.

Plotting the different intensity domains shows where the maximal lactate steady state lies (as in the figure below).

In domain 1, once a steady state is reached, heart rate and blood lactate stay stable.

Domain 2 lies between the lactate threshold and critical speed. Here heart rate and oxygen uptake drift upwards but do not reach their maximum.

In domain 3, critical speed is exceeded; if exercise continues, heart rate and oxygen uptake reach their maximum and exercise has to stop soon (Poole & Jones, 2012).

Exercise intensity domains according to Poole and Jones
Exercise intensity domains, after Poole and Jones.

The endurance column of the map is calculated from percentages of maximal heart rate, of MAS and of the 4 mmol/L lactate threshold.

The energy systems column lists the energy systems in simple terms, and the fibre column lists the muscle motor units involved. Each of these headings could be examined at length in physiology, and many points are open to debate. Jovanović, however, summarises them in a form that can serve as a basis for HIIT work. If you would like to study this potentially confusing table:

The endurance map, showing physiological boundaries for training
The endurance map by Jovanović (2018). It shows average physiological boundaries for an athlete with a maximal heart rate of 200 and a resting heart rate of 50.

Using an example model, the map tries to draw boundaries that can be used both for continuous running (or cycling and swimming) and for interval sessions. Treating these boundaries as fixed points can mislead coach and athlete alike: every athlete’s abilities are different.

At elite level: the map is a population average. For a trained athlete, the useful anchors are measured ones: MAS or VO₂max from a graded test, critical speed or power from time trials, and maximal sprint speed from a short sprint. Two athletes with the same MAS can have very different anaerobic speed reserves, which is why the same interval prescription (for example 15 s at 120% of MAS) can be easy for one and exhausting for the other.

If you find these boundaries hard to follow, read our article What Is HIIT? Benefits, Why It Works and How to Start, which includes sample sessions, or explore our other articles.

References

  • Jovanović, M. (2018). HIIT Manual: High Intensity Interval Training and Agile Periodization. Ultimate Athlete Concepts.
  • Seiler, S., & Tønnessen, E. (2009). Intervals, thresholds, and long slow distance: the role of intensity and duration in endurance training. Sportscience, 13, 32-53.
  • Solli, G. S., Tønnessen, E., & Sandbakk, Ø. (2017). The training characteristics of the world’s most successful female cross-country skier. Frontiers in Physiology, 8, 1069. https://doi.org/10.3389/fphys.2017.01069
  • Poole, D. C., & Jones, A. M. (2012). Oxygen uptake kinetics. Comprehensive Physiology, 2(2), 933-996. https://doi.org/10.1002/cphy.c100072
Was this helpful?
Hüseyin Akbulut
Written by Hüseyin Akbulut, MSc Coach

Hüseyin Akbulut is the founder of Sporeus and author of THRESHOLD (EŞİK), a 540-page Turkish-language book on endurance science.

  • 540pp THRESHOLD Book
  • MSc Sport Sciences
  • Marmara University
Full profile
Key Facts
Definitions of the Anaerobic Threshold

Defining the anaerobic threshold is complicated. In research, it has been identified using:

Endurance Boundaries and Training Intensity Zones

Building on the work of Seiler and Tønnessen (2009) and of Solli and colleagues (2017), three intensity ranges based on the aerobic and anaerobic thresholds are used: